Ana-U EasyPrinter S3, Руководство пользователя, Страница: 8 / 29

EasyPrinter S3 Users Manual
Technical specifications
•
Industrial design with high end belt transport
•
Transport 300 mm/s, printing 150 mm/s, erasing 50-100mm/s
•
Graphics and text mode (3 internal fonts)
•
Windows driver for printing text and graphics
•
Resolution: 300x300 dpi, greyscale dithering
•
Serial Interface: 57600 Baud (8 Databits, No Parity, One Stopbit),
Hardwarehandshake
•
USB interface Rev 2.0
•
Ethernet interface (TCP/IP socket connection – Port: 50020)
•
Prints cards with thermochromic surface and thermo-direct tickets
•
Mifare as standard, any other type possible with changeable adapter
•
Built-in Card direction detection
•
Desktop variant with or without card hopper
•
Erasing with printhead
Erase- and Printarea Limitations
Due to physical characteristics of thermo-rewriteable ISO cards, it is not
possible to ensure accurate printing up to the card edges. Therefore the borders
for accurate printing are defined as shown in Picture 2.
Compatible Card Systems
The EasyPrinter S3 is an industrial printer for use with thermo-rewriteable ISO
cards. Therefore it is possible to print and erase information onto the cards.
Further more cards with contactless chip as well as contact chip can be
modified electronically.
Card specifications regarding dimensions, tolerances, quality and construction
must be compatible with the relevant ISO standards for chip cards.
The following standards are used to specify the quality of usable cards:
ISO/IEC 7810, ISO/IEC 7811 1 to 5, ISO/IEC 7812, ISO/IEC 7813, ISO/IEC
7816.
INFO: Suitable thermo-rewrite foil for cards and finished qualified cards are
available at ANA-U GmbH!
Page 4 of 25 Version 1.4 - 27. March 2012
Picture 2: Erase- and Printarea
5mm
3mm
Erase- and Printarea Erase- and Printarea Erase- and Printarea Erase- and Printarea Erase- and Printarea Erase- and Printarea Erase- and Printarea Erase- and Printarea Erase- and Printarea