amzchef ZM1507, Инструкция по эксплуатации

Страница: 11 / 80

Connect the juicing body and the
main body:1.Have the triangular
aligning sign “▼” on the juicing
body align with the aligning
“unlocking triangular sign” on the
main body and then put the juicing
body into the main body (the three
clips on the juicing body will realize
alignment).Then turn the juicing
body anticlockwise. When there is
a click, it suggests that the
connection is finished.
Have the hexagonal shaft of the Auger
align with the hole on the main body and
push it horizontally until it reaches the
bottom (when alignment fails, just turn
the Augers lightly).
Fit the larger-hole end of the juicer
strainer into the tail of the Auger and
push it while the three clips of the juicer
strainer align with the three clamping
slots in the drum. (The juice strainer is
used with the juicing button in the rear
only. This function is used for juicing.)
11