15
The induction hob
makes a low
humming noise
when used on
a high heat setting.
This is caused by the
technology of induction
cooking.
This is normal, but the noise
should quieten down or
disappear completely when you
decrease the heat setting.
Fan noise coming
from the induction
hob.
A cooling fan built into your
induction hob has come on
to
prevent the electronics from
overheating. It may continue
to
run even after you’ve turned
the induction hob off.
This is normal and needs no
action. Do not switch the power
to the induction hob off at the wall
while the fan is running.
Pans do not
become hot and
appears in the
display.
The induction hob cannot
detect the pan because it is
not
suitable for induction
cooking.
The induction hob cannot
detect the pan because it is
too small for the cooking
zone or not properly centred
on it.
Use cookware suitable for
induction cooking. See section
‘Choosing the right cookware’.
Centre the pan and make sure
that its base matches the size of
the cooking zone.
The induction hob
or a cooking zone
has turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed
(typically alternating
with one or two
digits in the cooking
timer display).
Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
Failure Display and Inspection for induction cooking
zone
If an abnormality comes up, the induction cooker will enter the
protective state automatically and display corresponding protective
codes:
Problem
Possible causes
What to do
No pot placed on cooking zones
Pots must placed on
cooking zone.
