Service Menu
Select a Service
EDIT ENTRY
DELETE
ADD ENTRY
NAME?
Enter Name
NUMBER?
Enter Number
Registration
This handset is GAP compatible and is designed to operate as an
additional handset for AT-3086 base unit. The handset must go through
the registration process with a base unit in order to operate. Each
handset can be registered up to 4 base units.
If you register the handset with another manufacturer’s base unit, use
that manufacturer’s instruction manual and if the handset is registered
with another manufacturer’s base unit, some of the features may not be
available.
When registering, each handset can select base number for the base
to be registered so that it can be identified at base selection setting.
To register:
•
Press
.
Use
to scroll through the menu until the display
reads SYSTEM.
•
Press
. Use
to scroll through the menu until the display
reads REGISTER.
•
Press
. The display will read BS 1 2 3 4.
•
Enter the number of the base unit you wish to register using the
numeric key.
•
The handset will read PIN?.
•
Enter the PIN number (default is 0000).
•
Press and hold the PAGE button
on the base unit until you hear
2 beeps.
•
Press
on the handset. The handset will read SEARCH BS X
while it searches for the base unit (where ‘X’ is the number of the
base you are registering to).
•
Once a connection has been made, the handset name and number
(the next available number if the number of handsets already
registered with the base is less than 5) will be shown on the display.
Note: If the handset has not registered to a base unit, the display will
show NOT REG. The Signal indicator will be blinking.
9
10