Amylior LogoSilver IzyChair, Руководство пользователя

Страница: 14 / 24

P·14
fig. 13 fig. 14
Charging the batteries using the off-board charger supplied by us:
• Verify that the controller is powered off and the wheelchair is in drive mode.
• Connect the 3-pin output plug of the charger to the controller. (Fig.13)
• Connect the power plug of the charger to the standard wall outlet.
• The red LED on the charger lights indicates that the battery is charging. The green LED
on the charger lights up when the batteries are fully charged.
• We recommend that you charge the batteries for 8-12 hours.
• Remove the charger and power plug when fully charged, and put them into the bag
behind the backrest.
6.1.4 Overcharge
The overcharge protector, which is located in the battery box, is designed for the wheelchair’s
safety. Once motors or batteries overcharge, the overcharge protector will trip to cut off
the power. After one or two minutes, it will automatically reset and then you can continue
to drive the wheelchair.
6.1.5 Brake lever
When you want to stop, release the joystick and it will stop immediately.
6.1.6 Safety Belt
For your safety, the safety belt must be fastened before you drive the wheelchair. (fig.14)
6.2 OPERATION
6.2.1 Preparation before operation
• Do not turn on the power switch when sitting on the IZYCHAIR and turn off the
power switch before getting out of the wheelchair.
• Please observe whether the hand brake works or not.
• Please fold the footrest first then hold the armrest to sit on the wheelchair. Do not get
out of the wheelchair by stepping on the footrest.
• Otherwise the chair may tip over, which is dangerous.