Amylior LogoSilver IzyChair, Руководство пользователя

Страница: 12 / 24

P·12
fig. 12
VI. USE AND OPERATION
6.1 USE
6.1.1 Controller:
It is the key component of a wheelchair.
All electronics operating the latter are
housed in it(fig. 12). The controller
is usually installed on one armrest, which is
connected to a motor and battery in the
power box.
• Switch button: The switch button supplies the power to the control system for
electronic equipment, then the equipment supplies the power for the wheelchair
motor. Do not use the switch button to stop the chair unless in an emergency
situation. Otherwise, it may shorten the life of the wheelchair drive components.
• Joystick: The joystick is mainly used to control the wheelchair’s movement, including
its speed and direction(forward, backward and left or right etc). The further you push
the joystick from its central position, the faster the wheelchair moves. Whenever you
release the joystick, it will automatically return to the center and the brake will be
automatically stop the wheelchair.
• Horn button: The horn will sound if you press this button.
• Speed Up/Down Buttons and Speedometer: After turning on the power, the
speedometer shows the current maximum speed setting. This maximum speed setting
can be adjusted by the user through the speed up button or speed down button.
• Charger Socket: This must only be used by this wheelchair. Do not use the socket to
supply power to any other electrical devices equipment. Otherwise, it may damage the
wheelchair’s control system or its E.M.C performance (Electromagnetic tolerance).
WARNING!
If your wheelchair moves accidentally, immediately release the
joystick and the chair will stop automatically.
CAUTION!
If you connect any devices other than the supplied battery
charger into the socket,causing damage to the control system,
then the warranty is invalid.
Joystick
Charger socket
Horn button
Battery gauge
Speed light
Speed down
Speed up