background image

P·7

2.3 GENERAL SAFETY INSTRUCTIONS

•  The LIGHTCHAIR II may only be used in conformity with the instructions.
•  Only duly informed and authorized people may use the LIGHTCHAIR II
•  Only one person may use the LIGHTCHAIR II at any given time.
•  Other safety elements, belt and vest can be ordered as accessories from Logo Silver.
•  All safety instructions contained in this user manual and in all valid associated 

documents must be observed and applied. This notice must be available to the user at 
all times.

•  The fabric of the backrest and the cushion may, however unlikely, catch fire. The use of 

fire or a lit cigarette must be undertaken with extreme care.

•  Beware of obstacle clearance when driving uphill and descending.
•  Power level changes must be made while stationary.
•  Make sure the joystick is securely attached and straight.
•  Make sure the motor levers are unlocked in the «electric» position.
•  Only original manufacturer options can be used. The optional components must be 

fitted exclusively as indicated below. Failure to respect this recommendation results in 
the loss of warranty.

•  After removing special screws, nuts or washers; replace them if damaged and tighten 

them firmly.

2.4 TRANSPORT AND STORAGE SAFETY REQUIREMENTS

•  The LIGHTCHAIR II is designed to be folded, and must be transported in this fashion, 

or in a transport case (sold as an optional extra by Logo Silver) in order to travel safely. 
The LIGHTCHAIR II must only be lifted by the elements of the chassis.

•  During transport, the electrical part of the LIGHTCHAIR II must be switched off via 

the «On / Off» button.

•  It is forbidden to travel seated in the LIGHTCHAIR II when transporting it.
•  In order to guarantee the LIGHTCHAIR II’s lifespan, it must be stored in a sheltered 

place.

•  After each setting adjustment or modification made on the LIGHTCHAIR II, the 

mounting screws and nuts must be tightened securely.

Содержание LOGO SILVER LightCHAIR II





























Отзывы: