manualshive.com logo in svg

AMX VTX, Инструкция по эксплуатации

Поделиться
Скачать
AMX VTX Скачать руководство пользователя страница 15

VTX Video Teleconferencing System - Preliminary

Installation

11

Installation

Overview

This section describes the procedures for installing and configuring the VTX system.

Precautions

Please note the following precautions:

• 

Do not install telephone wiring during a lightning storm.

• 

Do not install telephone connectors in wet locations unless the connector is
specifically designed for wet locations.

• 

Do not touch telephone wires or terminals unless the telephone line has been
disconnected at the network interface.

• 

Use caution when installing or modifying telephone lines.

• 

Avoid using a telephone (other than the cordless type) during an electrical
storm.

• 

Switch the power off before installing any of the cables.

Installing the VTX System

To install the VTX system:

1. 

Connect the power cable to the AC connector on the back of the VTX and plug
the cable into the grounded outlet.

2. 

Connect the RCA cable connectors to the TiltCam (Figure 5).

3. 

Connect the cables from the TiltCam to the VTX (Figure 5 and Figure 6).

Содержание VTX



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды