AMX RMS CODECRAFTER, Руководство по эксплуатации/справочник

Страница: 46 / 71

Basic Operations
42 RMS CodeCrafter
a.
From the list of NetLinx code files listed in the Code File Selection page, click on the desired file and
click Next .
If NetLinx Studio workspace file (.APW) was not selected as the integrated file:
b.
The next page is Scheduling and i!-ConnectLinx options page. Check all
i!-ConnectLinx Options that apply.
4.
Select your i!-ConnectLinx Options:

Support pre-meeting presets?

Monitor source usage?

Using multiple display devices?
5.
Define the Room Name, Location, Owner .
6.
Click the radio button to select one of the following Scheduling Displays:

Main and welcome scheduling panels

Welcome scheduling panels only

Help Desk panels only

No scheduling display
7.
If you selected either Main and welcome scheduling panels or Welcome scheduling panels only , you can
set the default welcome panel subject and message at this time. If you do not enter anything in these fields
the stings will not be created.
Type a welcome subject and message in the text fields provided.
8.
Click Next . The next page is RMS Server Address page.
9.
Type the RMS Server Address in the field provided or leave blank to use the default. Click Next .
10.
The next page is RMS Virtual and Socket Device Definitions page. Type all D:P:S fields that apply.
11.
Click Next . The next page is Scheduling: Main Panels page.

To add a panel, click Add Panel and open the Add/Edit Main Panel dialog.

To edit a panel, select the panel from the list and click Edit Panel to open the Add/Edit Main Panel
dialog.
12.
Once you have added all of your main panels, click Next . If you selected either Main and Welcome Panels
or Welcome panels only in step 6 the next page is the Scheduling: Welcome Panels page. Otherwise it is
the Named NetLinx Devices page.
13.
To add a panel, click Add Panel and open the Add/Edit Welcome Panel window. To edit a panel, select
the panel from the list and click Edit Panel to open the Add/Edit Welcome Panel window.
14.
Once you have added all of your main panels, click Next. The next page is Named NetLinx Devices.
15.
To add a device, click Add Device and open the Add/Edit Named Device window. To edit a device, select
the device from the list and click Edit Device to open the Add/Edit Named Device window. If you would
like to find and add all MeetingManager devices not already in the Named Devices list, click Add all
Welcome and Main Panels to launch the Add All Welcome and Main Panels Window.
16.
Once you have included all of your named devices for your project, click Next . The next page is
Monitored Third-Party Devices page.
17.
To add a device, click Add Device and open the Add/Edit Monitored Device dialog. To edit a device,
select the device from the list and click Edit Device to open the Add/Edit Monitored Device window. You
can also add a device from a template, click Add Device from Template to open the Add Device from
Template dialog.

If you selected Add Device from Template, select the device from the list.

Either type or enter the Device, Virtual Device , and Logical Name .

Click OK .
18.
Once you have included all of your monitored devices for your project, click Next . The next page is
Device Parameters .
19.
To add a device parameter, click Add Device and open the Add/Edit Device Parameters window. To edit
a device parameter, select the device from the list and click Edit Device to open the Add/Edit Device
Parameters dialog.