RMS CodeCrafter Project Pages
31
RMS CodeCrafter
Edit Parameter Indices dialog
Add/Edit Device Parameter dialog (Cont.)
Reset Value:
A text field you can edit to set reset value.
32-bit signed number for Number, 16-bit unsigned number for Index and any
string up to 100 characters for String and Enum.
Trigger:
Select one of the following:
• None
• Button
• Channel
• Level
Use Range (Number):
Sets the minimum and maximum for number; this value is optional.
Use Units (Number or String):
Defines the unit type for the parameter, e.g., minutes, hours, degrees, or %.
This value is optional.
Set Range (Enum or Index):
A drop down list of enumeration strings. You can elect to:
• Add - adds the sting to the parameter use.
• Remove - removes the string from parameter use.
• Move Up - moves the string up the list of parameter use.
• Move Down - moves the string down the list of parameter use.
OK:
Closes this dialog and saves changes made.
Cancel:
Closes this dialog without implementing changes.
FIG. 19
Edit Parameter Indices dialog
Edit Parameter Indices dialog
Add string:
Adds the sting to the parameter use.
Remove:
Removes the string from parameter use.
Move Up:
Moves the string up the list of parameter use.
Move Down:
Moves the string down the list of parameter use.
OK:
Closes this dialog and saves changes.
Cancel:
Closes this dialog without implementing changes.
Содержание RMS CODECRAFTER
