AMX PTM-D15, Инструкция по эксплуатации

Страница: 16 / 42

Installation and Wiring
10
PTM-D15 15" Platinum Touch Panel
Connecting to Optional Components
In this example, the Platinum panel is connected to a TPI/3 interface.
1. Connect the VGA signal cable from the rear of the PTM-D15 panel to the Monitor Out port on
the back of the TPI/3 (FIG. 8).
2. Connect the Touch Screen signal cable from the rear of the panel to the Mouse Port on the back
of the TPI/3.
3. Connect the incoming video signal connector to either the Composite or S-Video connector
ports on the TP3-VID card.
VGA IN DB-15 Connector Pinouts
Pin Signal Function
1 Red Red signals
2 Green Green signals
3 Blue Blue signals
4 N/A Not used
5 GND Signal Ground
6 RAGND Red analog ground
7 GAGND Green analog ground
8 BAGND Blue analog ground
9 N/A Not used
10 SAGND Synchronization analog ground
11 N/A Not used
12 N/A Not used
13 HSYNC Horizontal synchronization signal
14 VSYNC Vertical synchronization signal
15 N/A Not used
FIG. 8 Attaching the cables from the panel to the rear of the AXB-TPI/3
VGA DB-15 (male)
connector
10
6
5
1
15
11
VGA Input cable - connects to
Monitor Out port on TPI/3
Touch Screen cable - connects to
Mouse Port on TPI/3
Mouse port
Connect
incoming
video to
TP3-VID
card
Monitor Out
port