AMX PT10-PRV 2 X 1, Инструкция по эксплуатации

Страница: 7 / 16

Installation and Wiring
3
PT10-PRV 2 x 1 Preview Switcher System
Installation and Wiring
This section covers the steps necessary to connect and operate a PT10-PRV 2 x 1 Video Preview
System. Before continuing, verify that you have received the correct components for your package.
Refer to FIG. 2 for more information.
Wiring Information for the AV2SM
Using the CC-REL connection cable
Use the CC-REL relay control cable (6-pin captive-wire to 8-pin captive-wire) to connect the
AV2SM to the AXB-REL8, as shown in FIG. 3.
Operation
Setting camera stations 1 and 2 on the AXP-PLV controller will switch the appropriate video to the
touchpanel preview screen.
FIG. 2 Front and rear views of the AV2SM
FIG. 3 CC-REL relay control cable connections
12 VDC power
supply connection
Front panel
Rear panel
VIDEO INPUT B
(BNC connector)
INPUT A connector
(6-pin captive-wire)
VIDEO OUTPUT
(BNC connector)
VIDEO INPUT A
(BNC connector)
GND -
SELECT
AXB-AV2SM
INPUT A connector
AXB-REL8
relay contacts 1-4
2A
2B