Installation and Wiring
6
PT10-ADD Additional Camera Pan/Tilt System
3.
Mount the PosiTrack unit to a flat surface by drilling four holes, according to the mounting-
plate dimensions shown in FIG. 4. Secure the unit to the surface using four 1/4" x 20 machine
bolts and lock washers. Ensure that the external white position marker, on the pan drive hub, is
inside the desired camera rotation range.
The PT10 can be mounted to camera mounts such as the TM-CAM, WM-CAM, and PM-CAM
(Pedestal mount). The Camera/Lens cradle can be mounted on either side of the cradle support
bracket.
FIG. 3
Center position for the camera cradle attachment (side view)
FIG. 4
Mounting-plate dimensions
Central tilt-axis
Camera cradle mounting holes
Camera points this way
Position markers, located on the outer surfaces, mark
the center for the vertical range of camera motion.
Pan Hub (mounting-plate)
.
Tilt Hub
3.00" BHC
(76.20mm)
3.45"
(87.7 mm)
Position marker
(on the outer surface)
Camera points this way when the pan drive is in the center
of it's range of motion (Home position).
3.453" (87.7 mm)
Содержание PT10-ADD
