AMX PRO-DP16 DECOR PROLINK FLUSH MOUNT KEYPAD PANEL, Инструкция по эксплуатации

Страница: 27 / 30

Panel Programming/Operation
23
PRO-DP16 Decor 16-Button PROlink Wall Panel
5. Press Off (pushbutton 12) to record the Dimmer Curve setting.
6. The panel automatically exits Curve Select mode.
Low-End Mode
The panel must be in Low-End mode in order to record low-end settings for the Packs. To enter
Low-End mode:
1. Enter Program mode (indicated by the PGM LED).
2. Press Mode (pushbutton 16) three times.
3. Low End mode is indicated by the LE LED.
Recording Low-End settings
1. Select the Pack that you want to record Low-End settings for.
2. Select the Channel that you want to record Low-End settings for on.
3. Enter Program mode (indicated by the PGM LED).
4. Enter Low-End mode (indicated by the LE LED).
5. Use the pushbuttons to enter a number between 0 and 99, to specify the low-end setting for the
selected channel, in percentage points.
For example, press pushbutton 6 for 6%; press pushbuttons 1 then 5 for 15%.
6. Press Off (pushbutton 12) to record the low-end setting.
For example, to select curve 10 (Non-dim in the following chart) you must press "1",
then "0", then "Off". Pressing "10" then "Off" does not work.
Dimmer Curves and Keypad Values
Curve number Keypad number Description
1 1 Standard Curve
2 2 Economy Curve
3 3 Advance MARK VII ballast
4 4 PRESCOLITE Intellect ballast
5 5 % Rolloff
6 6 % Roll Off
7 7 30 % Roll Off
8 8 Advance MARK X ballast
9 9 50% Roll Off; Fans
N 10 NON-DIM
O 11 Always Off
F 12 Always On
A 13 Modified Standard Curve
B 14 Transformer 1
C 15 Transformer 2
D 16 Slow Fade, High End
E 17 MDM module