Installing and Configuring Your AV Equipment
21
N1000 Series User Manual
Switching and Scaling Options
SVSI Encoders and Decoders make up a true AV matrix solution. In other words, one input can go to any or all outputs. Decoders
have internal scaling capabilities. Encoders in MPC mode do not scale. Keep the following in mind:
The input of an Encoder is the video and/or audio signal going into the Encoder.
The output of an Encoder is the network stream.
The input of a Decoder is the network stream.
The output of a Decoder is the digital video and/or audio being transmitted out to the display device.
Seamless Switching
The N1000 Series supports seamless switching capability if all of the sources have the same resolution and refresh rate. To get
streams onto a Decoder, use the
Video Matrix
tab to route video from an Encoder to a Decoder. This works seamlessly if the
previously mentioned settings are true. All you have to do is click the common cell on the matrix, and click the
Take
button. See
for an example.
FIG. 18
Seamless Switching Using the Video Matrix
Enabling this cell causes the
Conference Rm
Decoder
to listen to the
Conference Rm Encoder
.
Click
Take
to apply
changes.