AMX NetLinx NXR-ZGW, Руководство по эксплуатации/справочник

Страница: 38 / 42

Device Configuration
32 NXR-ZGW/-ZRP
3.
Select Settings > Master Communication Settings , from the Main menu to open the Master
Communication Settings dialog (FIG. 16).
4.
Click the Communications Settings button to open the Communications Settings dialog.
5.
Click on the NetLinx Master radio button (from the Platform Selection section) to indicate that you
are working with a NetLinx Master (such as the NXC-ME260 or NI-Series of Integrated
Controllers).
6.
Click on the Authentication Required radio box (if the Master is secured) and then enter a
username and password.
7.
Click on the TCP/IP radio button (from the Transport Connection Option section) to indicate you
are connecting to the Master through an IP Address.
8.
Click the Edit Settings button (on the Communications Settings dialog) to open the TCP/IP Settings
dialog (FIG. 16).
9.
Enter the IP Address into the TCP/IP Address field. This information is obtained from either your
System Administrator or obtained from the Master.
10.
Click OK three times to close the open dialogs and save your settings.
11.
Click Yes to interrupt the current communication from the Master and apply the new settings.
12. Select Tools > Reboot the Master Controller to access the Reboot the Master dialog, then click
Reboot to reboot the Master and incorporate any changes.
13.
Once the dialog replies with "Reboot of system complete" , press Done .
14.
Click the OnLine Tree tab in the Workspace window to view the devices on the System. The default
System value is one .
15.
Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the
list.
Verifying and Upgrading the device firmware via an IP
1.
Click the OnLine Tree tab in the Workspace window to view the devices on the System. The default
System value is one.
2. Right-click the associated System number (from the Workspace window) and select Refresh
System to detect all devices on the current system, establish a new connection to the Master, and
refresh the System list with devices on that system.
FIG. 16 Assigning Communication Settings and TCP/IP Settings
List of previously saved IP Addresses