Installation Guide
NXB-CCG
NetLinx® Clear Connect™ Gateway
Overview
The NXB-CCG NetLinx Clear Connect Wireless Gateway (
FG2606
) connects NetLinx
Controllers with Lutron's Clear Connect Dimmers, Switches, Occupancy/Vacancy Sensors
and Keypads. The Gateway includes a web interface for simplified integration, configuration,
and programming of Clear Connect devices. When integrated with an AMX NetLinx
Controller, installers now have a simple and cost-effective path to offer smart room
automation that includes light and AV control from a single interface, occupancy sensing,
scheduled shutdown and energy management.
Common Applications
The NXB-CCG is ideal for new and retrofit applications looking for the least costly way to add
light and AV control to a room. The NXB-CCG is designed to interface with Lutron's Clear
Connect Dimmers, Switches, Keypads, and/or Occupancy/Vacancy Sensors.
Features
•
Clear Connect Enabled
– Lutron's patented RF Technology uses a quiet band that is
essentially free of interference, ensuring reliable communication between system
devices
•
Perfect Way to Add Light Control
– Easily integrates with existing electrical
infrastructures – simply replace the light switch
•
Create Light & Control Events with Room Occupancy
– Use the Clear Connect
Wireless Occupancy Sensor with RMS to automatically power-up and shut-down the
lights and AV equipment to maximize energy conservation
•
Simple Web Configuration
– Browse to the NetLinx Clear Connect Gateway URL to
quickly add Clear Connect Enabled Switches, Dimmers, Keypads and Occupancy/
Vacancy Sensors
The NXB-CCG can control up to 31 devices at a time, and can configure up to ten devices at
a time up to that maximum through its Web Interface Pages.
Product Specifications
FCC/ IC Information
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation. Modifications not expressly approved by Lutron Electronics Co.,
Inc. could void the user's authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Proper orientation of the antenna helps ensure maximum range and the best performance.
The NXB-CCG should be positioned centrally to the devices being controlled, and as high
and clear of obstructions as possible. The NXB-CCG utilizes an omni-directional antenna,
which produces a circular pattern perpendicular to the antenna. For best performance, the
antenna should be positioned vertically (tip up or down, not sideways). Try to keep the
antenna at least 2 feet from metallic objects.
FIG. 1
NXB-CCG ClearConnect Wireless Gateway
NXB-CCG Specifications
Power Requirements:
•
Power Consumption:
600mA @ 5VDC, DC adapter
included (5V DC, 2A).
•
Surge Protection:
To withstand surge voltages without
damage or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge Voltages in
Low-Voltage AC Power Circuits.
•
Power Failure Memory:
Should power be interrupted, the
NXB-CCG will return to its previous state when power is
restored.
Front Panel Components:
Power/Status LED:
Displays power status and other system status indicators.
RF LED:
Displays the Tx / Rx activity on the RF link.
Ethernet LED:
Displays the connection status and Tx / Rx activity on the
Ethernet link.
Rear Panel Components:
CAT5 Cable Port:
Maximum cable length: 328 ft (100 m)
USB Cable Port:
Manufacturer use only.
Antenna
Power/Status LED
RF LED
Ethernet LED
Reset
CAT5 Cable
Port
USB Cable
Port
Button
5VDC Power
Jack
1 1/8”
(2.86 cm)
2.58”
(6.60 cm)
NXB-CCG Specifications (Cont.)
Rear Panel Components (Cont.):
Reset Button:
Press and hold for 20 seconds to restore the system to the
Factory Default settings.
Power Jack (to DC
adapter)
(IEC PELV / NECR Class 2). To be connected to a class 2
power source only.
Operating Environment:
• 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity,
non-condensing.
• Indoor use only.
ESD Protection:
ESD protection to withstand electrostatic discharge without
damage or memory loss, in accordance with IEC 61000-4-2.
Communications:
• The NXB-CCG communicates to other Clear Connect
devices through RF.
• All devices (except wired accessory dimmers/switches)
must be located within 30 feet (9 m) of the NXB-CCG.
Auto Discovery:
Supports the ZeroConf auto discovery protocol.
Dimensions (HWD):
• Without antenna: 1 1/8” x 2 5/8” x 4 7/16” (2.86 cm x 6.60
cm x 11.23 cm)
• With antenna: 6 1/2” x 2 5/8” x 4 7/16” (17.15 cm x 6.60 mm
x 112.27 mm)
Weight:
0.3 lbs (136.08 g)
Certifications:
• FCC FCC Title 47 Part 15 Subpart B and C
• IC
• cULus UL 60950-1
Included Accessories:
• 5VDC Adapter (
WA-10J05FU
)
• CAT5 Suppression Ferrite
Other AMX Equipment:
• CCD-F6AN-DV-WH, Clear Connect 6A Fluorescent Dimmer
(
FG2606-12-WH
)
• CCD-RD-WH, Clear Connect 120V Accessory Dimmer
(
FG2606-31-WH
)
• CCD-RS-WH, Clear Connect 120V Accessory Switch
(
FG2606-32-WH
)
• CCD-RS-277-WH, Clear Connect 277V Accessory Switch
(
FG2606-33-WH
)
• CCD-VCRB-P-WH, Clear Connect Radio Powr SavrTM
Ceiling Mount Vacancy Sensor - CA. Only
(
FG2606-42-WH
)
• CCD-6NA-WH Clear Connect Phase Adaptive Dimmer
(
FG2606-13-WH
)
• CCD-15APS-1-WH, Clear Connect Switching Plug in
Device - 15 A Softswitch (
FG2606-51-WH
)
• CCD-W6BRL-WH, Clear Connect Wall Keypad - 6 button
with Raise/Lower (
FG2606-61-WH
)
• CCD-6D-WH, Clear Connect 600W Incandescent/MLV
Dimmer (
FG2606-11-WH
)
• CCD-8S-WH, Clear Connect 120/277V Switch
(
FG2606-21-WH
)
• CCD-OCRB-P-WH, Clear Connect Radio Powr SavrTM
Ceiling Mount Occupancy/Vacancy Sensor
(
FG2606-41-WH
)
