30
FIG. 18
I/O LEDs
FIG. 19
Video Input Selection
Wiring and Device Connections
IR/SERIAL LEDs
The IR/SERIAL LEDs light red to indicate that the corresponding IR/Serial port is transmitting data. There are four IR/SERIAL LEDs
on the NCITE-813AC (see FIG. 17).
FIG. 17
IR/SERIAL LEDs
I/O LEDs
The I/O LEDs light yellow to indicate that the corresponding I/O port is active. There are four I/O LEDs on the NCITE-813AC (see
FIG. 18).
Video Input Selection (1-8)
The eight backlit Video Input Selection buttons (1-8) allow you to select an active video input (see FIG. 19).
Each numbered VIDEO INPUT SELECTION button is associated with the corresponding numbered Input on the rear panel
(refer to FIG. 7 on page 26):
Instruction Manual - Incite Digital Video Presentation Systems
Video Input Selection Options
Video Input Selector
Corresponding Input Connector
Input 1
VIDEO INPUT 1 (VGA connector)
Input 2
VIDEO INPUT 2 (VGA connector)
Input 3
VIDEO INPUT 3 (HDMI connector)
Input 4
VIDEO INPUT 4 (HDMI connector)
Input 5
VIDEO INPUT 5 (HDMI connector)
Input 6
VIDEO INPUT 6 (HDMI connector)
Input 7
DXLITE VIDEO INPUT 7 (RJ-45 connector)
Input 8
DXLITE VIDEO INPUT 8 (RJ-45 connector)
