Setup Mode
7
Mio Modero R-3 Remote
Setup Mode
The
Setup
mode allows you to set the following device features on the Mio R-3:
Transmit Mode
Timeout Adjustment
Download Mode
Debug Mode
Firmware Version
Device ID
LED Awake Brightness
LED Sleep Brightness
ZigBee ID PAN, Channel, and System Connection
Site Survey
To enter
Setup
mode:
1.
Press and hold the
STOP
button and the
INPUT
button. The two buttons must be pressed within 0.1
seconds of each other and held down for 2 seconds. The device indicates you are now in
Setup
mode. The available modes are listed below.
2.
Press the
EXIT
key when you are finished. The Mio R-3 will automatically exit
Setup
mode after
30 seconds unless the device is in
Download
mode.
Transmit Mode
Press button
1
to select from one of the different available transmission modes. The
Transmit
mode
changes each time
1
is pressed. The predetermined modes are:
IR 38 Khz
IR 455 Khz
ZigBee Mode
IR 38 + ZigBee
IR 455 + ZigBee
The display indicates the selected mode. 30 seconds after selecting the mode, the menu returns to
Setup
mode.
Timeout Adjustment
Press button
2
on the remote to change the sleep timeout from the default. Each time
2
is pressed, the
sleep timeout raises incrementally. The predetermined sleep timeouts are 3,6,9, and 12 seconds.
The display indicates the selected sleep timeout. 30 seconds after selecting the mode, the menu returns to
Setup
mode.
Your settings will not be lost in the event of battery removal or failure.
Содержание Mio Modero R-3
