AMX MAX-CSD 10, Руководство по эксплуатации и справочник

Страница: 38 / 110

MAX-CSE Web Interface
32 MAX-CSE/MAX-CSD10 Operation/Reference Guide
A/V Set up Page
The A/V Set up page (FIG. 17) is accessed by clicking on the Audio/Video button in the Navigation Bar.
This page allows a user (with the proper access rights) to configure the properties associated with both
the incoming video and audio content.
The following table lists the A/V Setup page features that can be configured by an administrator or other
authorized user.
FIG. 17 A/V Set up page
A/V Set up Page Features
Feature Description
Video: This section allows the user/administrator to define the detection and format parameters for
the incoming video signal.
• Video In These two radio boxes provide the option to select from either Composite or S-Video as the
incoming video source type. The selected type determines which rear connector is used as
the video input connector.
This selection instructs the MAX-CSE to use/expect video from a specified rear video con-
nector. As an example: setting the Video In option to Composite, tells the MAX-CSE to begin
detecting a video signal from the rear Composite connector.
• Video Port These two radio boxes provide the option to select from either NTSC or PAL as the format
type of the incoming video signal.
This selection instructs the MAX-CSE to use/expect a particular video format.
Audio: This section allows the user/administrator to define the gain used by the current microphone
input.
• Mic Gain This field allows the user to enter a value (from 0-99) associated with the gain used by the
rear microphone input.
The incoming microphone audio signal can be muted either by toggling the state of the
Microphone icon located at the top of each UI page or entering a value of zero into this field.