manualshive.com logo in svg

AMX MAX-CSD 10, Руководство по эксплуатации и справочник

Поделиться
Скачать
AMX MAX-CSD 10 Скачать руководство пользователя страница 35

MAX-CSE Web Interface

29

MAX-CSE/MAX-CSD10 Operation/Reference Guide

Stream Profiles Page Features (Cont.)

Feature

Description

• Sampling Rate

A drop-down list from which the user can choose the sampling rate used on the audio 
source. 
• Sampling rate defines the number of samples per second taken from a continuous 

signal to make it a discrete signal. 

• Rate is measured in KHz (KiloHertz). 
• Available audio sampling rates: 

32KHz

, 

44.1KHz

, and 

48KHz

.

• Some of the common uses for these rates include:

 - 

32,000 KHz

 - miniDV digital video camcorder 

 - 

44,100 KHz 

- compact disc, also most commonly used with MPEG-1 audio (VCD, 

SVCD, MP3) 
 - 

48,000 KHz

 - digital sound used for digital TV, DVD, DAT, films and professional 

audio

• At this time, 32KHz is not supported within the Modero firmware.

• Effective Rate

A drop-down list from which the user can choose the amount of incoming audio data 
throughput available for use by the MAX-CSE. 
• The larger the amount of available audio data coming through the unit for encoding, 

the better the outgoing audio quality to the target IP device.

• Available effective data rates: 

96Kbps

 or 

192Kbps

Stream:

This section allows the user/administrator to define the transport protocols and destina-
tion parameters for the outgoing stream content (such as IP Address and Audio/Video 
Ports).

• Transport Protocol

A drop-down list from which the user can choose between the two types of available 
data transfer/handling protocols.
Available transport protocols: 

UDP

 (default) or 

RTP

•

UDP

 (User Datagram Protocol) allows the transport of both MPEG-2 video and audio 

inside a single stream that is encapsulated as part of a standard MPEG-2 Transport 
Stream. If UDP is selected as the protocol type, the Target Audio Port field becomes 
greyed-out and unused. In this case, both the audio and video streams are combined 
and sent to a single target port.

•

RTP

 (Real-time Transport Protocol) defines a standardized packet format for 

delivering audio and video over the Internet. By transferring video and audio over 
separate streams, RTP allows audio only players to receive this separated content as 
would their audio/video player counterparts. If RTP is selected as the protocol type, 
the Target Audio Port field becomes enabled. In this case, the audio and video 
streams are sent as separate entities to two separate target ports.

Note

: The UDP Transport Protocol only supports the use of the MPEG-2 codec, 

whereas the RTP Transport Protocol can support using both MPEG-2 and MPEG-4 
codecs.

Содержание MAX-CSD 10















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды