AMX I!-PCLINK WEB, Инструкция по эксплуатации

Страница: 12 / 32

Running i!-PCLink/Web
6
i!-PCLinkWeb
NetLinx Connection
To configure the NetLinx connection settings, please select the Configure button on the main page.
(Note, the Configure button is not available if there is an active connection, you must first
disconnect.)
You will be prompted with a connection configuration dialog.
1.
Select the desired connection method.
2.
Completely fill out all remaining connection setting information pertaining to the particular
connection method you selected. i!-PCLink/Web supports the following NetLinx connection
methods:
a.
TCP/IP Connect (Network)
In the Connect mode, the i!-PCLink/Web application actively connects to the NetLinx master. You
simply need to enter the IP Address or Host Name of the NetLinx master in the "Host Address" box
and enter the ICSP port number in the "Host Port" box. If you have not changed the ICSP port of
the master through telnet or terminal, it is using the default of 1319).
FIG. 6 TCP/IP Connect (Network)
This is the recommended connection method.