Upgrading Firmware
28
MXD/T-700 7" Modero X Series® Touch Panels
Upgrading Firmware Via NetLinx Studio
The MXT-700 and MXD-700 use an Ethernet connection for programming, firmware updates, and touch panel
file transfer via NetLinx Studio. If you have access to the panel’s network, you may transfer files directly to the
panel through NetLinx Studio
To upgrade firmware via NetLinx Studio:
1.
Launch NetLinx Studio and select
Settings
>
Master Communication Settings
from the Main menu to
open the
Master Communication Settings
2.
Click the
Communications Settings...
button to open the
Communications Settings
3.
Click on the
NetLinx Master
radio button from the
Platform Selection
section.
4.
Click on the
Virtual Master
radio box from the
Transport Connection Option
section to configure the PC
to communicate directly with a panel. Everything else, such as the Authentication, is greyed-out because
this connection is not going through the Master’s UI.
Firmware upgrades cannot be made through an Ethernet-connected PC to the touch
panel, unless that PC is connected to the panel’s network. Upgrades cannot be made
with NetLinx Studio through a USB connection to the panel from a PC. For more
information on firmware transfers, please refer to the online help in NetLinx Studio.
FIG. 27
Master Communications Settings dialog box
FIG. 28
Communications Settings dialog box
Содержание FG5968-04
