12
USER MANUAL - DUX-TX-70 / DUX-RX-70 HDMI EXTENDER
Install Hardware
WARNING:
Before installation, disconnect the power supplies of all the devices.
Please use quality cables and accessories specified or provided by the
manufacturer.
During installation, connect and disconnect cables with caution.
To install DUX-TX-70 and DUX-RX-70 (See Fig 5: Installation Instruction Chart on
Page 13):
1. Connect an HDMI source device (e.g. Blu-ray player, game console, satellite/cable
TV, media server, etc.) to DUX-TX-70’s
HDMI IN
port via an HDMI cable.
2. Connect a display device (e.g. LED/LCD display or projector) to DUX-RX-70’s
HDMI OUT
port via an HDMI cable.
3. Connect DUX-TX-70’s
HDBT OUT
port to DUX-RX-70’s
HDBT IN
port via a CatX
cable.
4. Connect an IR Emitter to
IR OUT
port of DUX-TX-70 and a broadband IR Receiver
to
IR IN
port of DUX-RX-70. (Or connect a broadband IR Receiver to
IR IN
port of
DUX-TX-70 and an IR Emitter to
IR OUT
port of DUX-RX-70.)
5. Connect the power adapter to DUX-TX-70, then connect the adapter to a power
supply. (DUX-TX-70 and DUX-RX-70 can be connected to power individually.)
6. Power on all the units and start operation.
Note: When all set, check the LED indicators of both DUX-TX-70 and DUX-RX-70. For
LED indication, please refer to page 08 and 10.