AMX DESIGN XPRESS HOME THEATER V1.3 - ON SITE INSTALLER GUIDE, Инструкция по эксплуатации

Страница: 18 / 30

Understanding the Report File
14
DXP-HT v1.3 - On-Site Installer’s Guide
Examples:
Touch Panel:
Touch Panel 01 (TP) of type: CV10 NI-4000 device address 128:1:0 using
4 devices
Touch Panel 01 (TP 1) of type: Modero CV17 NXI Controller device
address 10501:1:0, Menu style: Static
Miscellaneous:
NetLinx NXI device address is 5001:1:0
AMX ALD-D48 lighting controller, device address is 5600:1:0
Wiring/Connections
This section details the locations where all of the cables will connect. It will define the connections
for all of the AMX equipment as well as all source and display equipment, IR ports, and any other
connection that must be made.
Example #1:
IR Devices
DVD
Connected to NXI Controller port 10
IR Pulse Time 5/10 seconds
Time Gap Between IR Pulses 5/10 seconds
IR Pulse Time for Power 5 seconds
Time Gap Between IR Power Pulses 5 seconds
Uses Carrier Signal
XCHMode 0
Serial Devices
Switcher
Connected to NXI Controller port 1
Using Control Logic Autopatch Precis
Baud rate 9600
EtherNet Devices
MAX 2_1
IP Address 192.168.168.168
Using Control Logic MAX-IMS, at Output Zone # 1
Relay Devices
Screen
Connected to NXI Controller port 7
1st relay action labeled Up connected to relay #1
2nd relay action labeled Down connected to relay #2
3rd relay action labeled Stop connected to relay #3
Example #2:
CD Changer is connected to NetLinx using IR port 2, IR pulse time 3/10
second
DVD is connected to switcher input 1
Go through this section of the report one item at a time and perform each connection. Use this
section as a list of connections to make and check them off as you go.