AMX Camrobotics, Инструкция по эксплуатации

Страница: 7 / 28

Camrobotics Introduction 3
Stores program commands in 64K of battery-protected memory that can be
expanded to 256K
AXP-DTC
Is a professional joystick-assisted camera operator control interface
Displays positive status feedback from illuminated pushbuttons
Emulates analog control for lens iris and joystick speed adjustment
Stores and recalls up to 144 preset positions, 24 per camera station, for up to 6
camera stations using shot, mode selection, and camera station pushbuttons
AXB-CAM
Controls pan/tilt voltage from external supply (6 VDC to 24 VDC, 1 A)
Controls pan/tilt voltage (-12 VDC to 12 VDC, 150 mA)
Controls zoom and focus voltage (-12 VDC to 12 VDC, 150 mA)
Communicates with most PCs through RS-232 port (300 to 38,400 baud)
Has eight adjustment potentiometers (POTs) for setting the center and range
voltages for pan, tilt, zoom, and focus operations
Has five easily accessible calibration test points for checking control voltage
settings for pan, tilt, zoom, and focus operations
CAM-1000
Handles a camera load of up to 18 pounds (8.2 kg)
Adjusts to a variety of camera/lens centerlines
Installs using four pre-tapped holes (1/4 x 20 thread) or standard camera
tripod mount (3/8 - 16 thread)
Limits pan and tilt range using adjustable external stops (270-degree
maximum pan, 90-degree maximum tilt)
Operates on 12 to 24 VDC power
Delivers precise motion control and position feedback for precise preset
repeatability