AMX Camrobotics, Инструкция по эксплуатации

Страница: 19 / 28

Camrobotics Operation 15
Preset Operation
The AXP-DTC features up to 24 preset positions for each camera station. A
programmed shot, when recalled by the operator, automatically commands the
AXB-EM232 to have the AXB-CAM move the CAM-1000 pan/tilt with lens and
camera to pre-determined pan/tilt and zoom/focus locations.
Programming the presets
To program the preset positions:
1.
Press the number button of the camera station (see Figure 8) to be programmed.
That button is now illuminated.
Mode buttons
SPEED knobs
2.
If you are using an optional preview monitor and video switcher, use the video
switcher to route the camera’s video to the preview monitor. Refer to the video
switcher’s documentation for instructions.
3.
Use the pan/tilt joystick to position the camera platform to compose the desired
scene.
4.
Frame the scene with the zoom and focus joystick.
Figure 8
AXP-DTC controls