AMX BCS, Инструкция по эксплуатации

Страница: 34 / 53

Appendix A – Product Specific BCS Commands
31 Instruction Manual – BCS Basic Control Structure Protocol
Modula and Modula CatPro
Modula and Modula CatPro systems support the following items:
General Commands

Executing and disconnecting switches (see page 6 and page 7)

Verifying signal status (see page 8)

Executing local presets – predefined in XNConnect (see page 10); these products support
254 local presets

Defining and executing global presets (see page 11); these products support 64 global presets
Audio Commands (for systems that support digital gain and volume control)
If the Modula or Modula CatPro supports digital control of audio signals, it supports the following audio
commands.

Digital output volume control – absolute, relative, and increment/decrement methods
(see page 13)

Verifying volume status (see page 15)

Muting and un-muting outputs (see page 14)

Digital input gain control – absolute, relative, and increment/decrement methods (see page 16)

Verifying digital input gain status (see page 18)
Specific Commands and Conditions

Modula and Modula CatPro models with Application Code v 2.6.0 or later support fragmented
status reporting (see page 9)

Modula and Modula CatPro models with Application Code v 2.4.2 support a limited set of
system error codes. Error code reporting is always enabled by default and cannot be turned off
(see page 41)
Important: If the Modula system contains RS-422 boards (which do bi-directional switching), we
recommend reading the information in the “Instruction Manual
–
Modula” on these boards before
using BCS commands to control them
.
Auxiliary Commands
Auxiliary Commands Supported by Modula and Modula CatPro
To cause a warm reboot
~app!
To view a long splash screen with advanced system information
~scr!