Verifying Signal Status
6
CP-10 Instruction Manual
No outputs
–
If no outputs are routed to the specific input, “DIS” (disconnect) displays in the
Output field. The Status screen below indicates that Input 2 is not routed to any outputs.
5.
Press the Status Key to return to the Status screen and select another signal to verify.
Or
Press the Cancel Key to return to the Command screen.
The following example verifies the signal status of Output 9 on Level 0.
To verify the status of an output signal:
1.
At the Command screen, press the Status Key.
The Status screen appears.
2.
Press the Level Key and enter “0.”
3.
Press the Output Key and enter “9.”
4.
Press the Take Key.
An input
–
The status screen below left indicates that Output 9 is receiving a signal from Input 3.
No inputs
–
The Status screen below right displays “DIS” (disconnect) in the Input field, indicating
that Output 9 is not receiving a signal from an input.
5.
Press the Status Key to return to the Status screen and select another signal to verify.
Or
Press the Cancel Key to return to the Command screen.
