![background image](http://html.mh-extra.com/html/amx/ant-rdr/ant-rdr_operation-reference-manual_2937561006.webp)
Anterus™ RFID Solution
2
Anterus RFID Solution
ANT-RDR RFID Reader
The ANT-RDR (FG5172) connects to the NetLinx controller to initiate system events whenever an ANT-
TAG Device/Asset tag, or ANT-BDG ID badge passes into its zone (FIG. 2).
The ANT-RDR communicates with the NetLinx Master via AXLink, which supports up to
255 devices on a single AXLink bus spanning for a total distance of 3000 feet (915 m).
The ANT-RDR uses a 4-pin 3.5 mm mini-Phoenix (male) connector to provide data and power
to the ANT-RDR via the AXLink bus.
FIG. 1
Anterus RFID Group
FIG. 2
ANT-RDR RFID Reader
ANT-RDR
RFID Reader
ANT-TAG
Device/set Tag
ANT-BDG
Badge Tag
Front
Rear
8-position
DEVICE
DIP Switch
RF Stub Antenna (433 MHz)
4-pin AxLink
Connector
AxLink/RF
Status LEDs
Содержание ANT-RDR
Страница 18: ...Installation 14 Anterus RFID Solution ...
Страница 36: ...Programming 32 Anterus RFID Solution ...
Страница 37: ...Programming 33 Anterus RFID Solution ...