Amundson Opticam, Руководство пользователя, Страница: 4 / 32

4
Before the first use, charge the battery fully. Let the battery drain
completely before recharging to ensure peak performance.
Make sure the device is OFF before charging. The typical charge time
is 3-4 hours. To protect the battery and prolong its life, do not charge for
longer than 8 hours continuously.
There are 2 ways to charge your Opticam:
A) 100-240 AC ADAPTER
Plug the USB cable (A) into the AC adapter (B) and into the Opticam (C),
then plug the AC Adapter into a wall socket (D). On charging mode, the
battery indicator light (E) shows a steady RED light. Once the battery is
fully charged the RED light will turn off.
B) COMPUTER USB PORT
Plug the USB cable (A) into the Opticam (C), then plug the USB into a
computer USB port (F). On charging mode, the battery indicator light
(E) shows a steady RED light. Once the battery is fully charged the RED
light will turn off.
When charging in the computer, the power/recording light (G) will blink
a BLUE light showing that your Opticam is connected to a computer.
This way you can manage your videos and charge the Opticam at the
same time.
BEFORE USING YOUR OPTICAM
G
E
C
A
Charging the battery