Revise Date: 1/12/2016
n:\amtryke\manuals and instructions\models\hp-1000\hp1000 w-tilt steering assembly.doc
6 of 25
Attaching Rear Deck to Main Frame
1)
Slide rear deck into main frame.
2)
Using four large lag bolts, 4 large flat washers and four large nuts attach rear deck to main frame, use a 15mm
socket or wrench to tighten nuts. Do not tighten up completely at this point.
3)
Install chain from main hub to rear axle sprocket.
4)
Using a pair of needle nose pliers snap the master link in place.
5)
Pull back on the rear deck to tighten the chain, while pulling back tighten the four 15mm nuts using a 15mm
socket or wrench.
6)
Install two upper support Allen bolts, washers and nuts using a 5mm Allen wrench & 13mm wrench. There is
one on each side of the rear deck.
Rear Deck
Main Frame
Master Link
Rear Axle
Sprocket
Main Hub
Upper Support
Allen Bolt
