Revise Date: 1/12/2016
n:\amtryke\manuals and instructions\models\hp-1000\hp1000 w-tilt steering assembly.doc
13 of 25
3. While holding the shoe against the rim,
tighten the shoe fixing nut.
5. Adjust the balance with the spring tension adjustment
screws.
4. Pass the inner cable through the inner cable lead. Set the
cable with the clearance of 1mm between each brake pad
and the rim, tighten the cable fixing bolt.
6. Depress the brake lever about 10 times as far as the
grip to check that everything is operating correctly and
that the shoe clearance is correct before using the
brakes.
