28
5.4.2.
WEB SERVER
NOTICE!
Changing these ports may affect your ability to access the
power supply
.
The Web server port numbers can be changed to any port within the
range 1 – 65565.
HTTP Port:
Allows you to change the HTTP port number. This port
is used for HTTP traffic between the power supply and Web browser.
The default HTTP port is
80
. If you change the HTTP port to a
number other than 80, you will have to append the new port number
to the URL used to access the power supply (e.g.
http://192.168.0.181:8000
for IP address
192.168.0.181
, port
8000
).
HTTPS Port:
Allows you to change the HTTPS port number used by
the power supply. HTTPS (HTTP secure) is a protocol used to
encrypt the traffic between Web browsers and servers. The default
HTTPS port is
443
.
UDP Port:
Allows you to change the UDP port number used by the
power supply. This port is used when applying firmware upgrades to
the power supply. The default UDP port is
9393
.
5.4.3.
The ICT Digital Series is capable of sending email alarm notifications.
Configure these settings if you would like to receive e-mail alarm
notifications from the power supply. The information for the following
settings is available from your Network Administrator or Internet
Service Provider (ISP).
SMTP Server:
The name or IP address of your SMTP server used
for sending outgoing e-mail.
SMTP Port:
The port used by your SMTP server. The standard port
used by most SMTP servers is
25
.
"From" E-mail Address:
Enter the e-mail address you wish to
appear as the sender of the e-mail notifications.
"To" E-mail Address #1:
Enter an e-mail address you wish to
receive the e-mail notifications. This field can also be used to send a
