AMTC RemoteLink AV Digital Media Player Installation and Operation Guide 11/07/2016 Page 3
SAFETY INSTRUCTIONS
– Please read before opening your player!
The RemoteLink AV player was designed and manufactured by AMTC to meet strict quality and safety standards. There
are, however, some precautions that you should be particularly aware of:
1. Read Instructions
– This guide should be read thoroughly prior to operating the unit.
2. Retain Instructions
– This guide should be retained in a safe place for future reference.
3. Heed Warnings
– All warnings on the player and in this guide should be adhered to.
4. Follow Instructions
– All operating and use instructions should be followed.
5. Water and Moisture
– The unit should not be used near water – for example, washtubs, sinks, in a wet basement,
or near a swimming pool, etc.
6. Ventilation
– Overheating caused by improper ventilation is one of the primary causes of premature failure of
electronics! The unit should be situated so that its location or position does not interfere with its proper ventilation.
For example, the unit should never be situated on a bed, sofa, rug or similar surface that may block ventilation
openings; or placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through
the ventilation openings.
7. Heat
– The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
8. Dust
– The unit should not be situated in any excessively dusty area.
9. Power Cord Protection
– Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them.
10. Object and Liquid Entry
– Care should be taken so that objects do not fall onto, and liquids are not spilled onto, the
unit enclosure.
11. Damage Requiring Service
– The unit should be returned to AMTC when:
a. The power supply cord or the plug is damaged;
b. Objects have fallen onto, or liquid has spilled onto the unit;
c. The unit has been exposed to rain;
d. The unit does not appear to operate normally or exhibits a marked change in performance
e. The unit has been dropped or the enclosure has been damaged.
12. Servicing
– The user should never attempt to service the unit except as described in the manual. All other servicing
should be referred to AMTC.
13. Electromagnetic Fields
– do not place the unit on top of or near any device that could generate an electromagnetic
field (motor, amplifier, magnet, etc.).
