AMTC RE3001, Руководство пользователя

Страница: 33 / 64

33

DHCP Server: Select whether enable or disable the DHCP server feature.

Start IP Address and End IP Address: You can specify the starting and ending address of
the IP address pool here. These addresses should be part of the same IP address subnet as
the
device
’s LAN IP address.

Enter the Lease Time.
Knowledge Expansion

DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the
LAN/private network.

When you enable the DHCP Server, the DHCP Server will automatically allocate an unused
IP address from the IP address pool specified in this screen to the requesting device as long
as the device is set to
―Obtain an IP Address Automatically‖.

If you disable this feature, you have to manually configure the TCP/IP settings for all PCs on
your LAN to access Internet.

Lease Time: is the length of the IP address lease before it is refreshed.
Tips

By default, the
device
functions as a DHCP server. Do not disable the DHCP server feature
unless you want to manually configure the TCP/IP settings for all PCs on your LAN.
1. Lease time will be renewed automatically upon expiry. No additional configurations are
needed.
2. If you are not an advanced user, the default DHCP server settings are recommended.

In order to use the function of the
device
's DHCP server, LAN in the computer's TCP/IP
protocol must be set to ―automatically obtain IP‖.

After you connected with up level router successfully, the DHCP Server function will be closed
automatically, the default is open and the default lease time is 45 seconds.