AMTAST AMT-316, Руководство по эксплуатации

Страница: 4 / 8

4

Press E3 key again to display the stun on the lower portion of the screen;
• Repeat the steps above can continue accumulation.
Addition (using M memory)
Press the M key to save the fust: measured result, and the "M+" will appear on the display,
Press the READ key for new measurement;
Press the key to enter the addition mode, and the "+" will appear on the display.

Press the RM key to recall previous measurement for the addition (displayed on the bottom of the
display). and at the same time, the "M+" icon disappears and the stored memories will be
automatically eliminated;

Press +/= key, the sum is shown on the lower portion of the screen.
Area
Press SET key to enter area mode, and the will appear on the display for calculation of a room
area;
The length character "L" on the display will blink showing the length measurement you will be
firstly taking. Press READ key to take length measurement that is displayed on upper portion of
the screen. (Step 1);

The width character "W" on the display will blink showing the next measurement to take.
Press READ key to take width measurement that is displayed on upper portion of the screen
(Step 2);
Then the area is automatically displayed on the lower portion of the screen;

Press the READ key again will toggle back and forth between the length and width
measurement on the upper portion of the screen;