AMT Datasouth Codewriter 4500 Series страница 6 Скачать руководство пользователя | Manualshive

Страница: 6 / 94

background image

vi

Datasouth CodeWriter 4500 Disclaimer of Warranties

Software

All software is licensed “as is” without warranty of any kind, either expressed
or implied, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose. Datasouth Computer and
it’s authorized sales agent have no liability or responsibility to you or any
other person or entity with respect to any liability, loss, or damage caused, or
alleged to have been caused directly or indirectly by the software system
(hardware, software, manuals, and labels), nor for indirect, special, or
consequential damages. In no event will Datasouth Computer be liable to you
for any damages, including any lost profits, savings, or other incidental or
consequential damages arising out of the use or inability to use any program
produced by Datasouth Computer or any authorized dealer advised of the
possibility of such damages occurring. No person has the authority to modify
such limitations, unless obtained in writing and signed by a corporate officer
at Datasouth Computer. Acceptance of software is conditional on the
acceptance of this disclaimer. Use of the hardware/software constitutes
acceptance of this disclaimer.

Extended Maintenance

Datasouth Computer provides telephone support and maintenance following
delivery of your printer. Contact Datasouth for details and current pricing on
extended maintenance.

Hardware Warranty

Hardware provided with your system is warranted to be free from defects in
workmanship. Refer to the warranty information included with the printer for
details. Call East Coast customer support at (800) 476-2450 or West Coast
Customer Support at ( 800) 962-7344 for return authorization.

Labels, Tags and Ribbons

Only previously authorized label and ribbon material may be used in this
printer. Due to variations in label and ribbon quality, use of unauthorized
material may damage the printer and may void the warranty. Check with your
Datasouth Dealer for a list of authorized materials.

«
...
4
5
6
7
8
...
»

Содержание Codewriter 4500 Series































































































Отзывы:

Нет отзывов

Похожие инструкции для Codewriter 4500 Series

Бренд: EasyThreed Страницы: 15

Documax A6300 Series

Бренд: DataSouth Страницы: 180

Бренд: Kodak Страницы: 2

PhotoChrome R-38

Бренд: LYSON Страницы: 8

Бренд: Felix printers Страницы: 26

Бренд: Lexmark Страницы: 289

Бренд: Mita Страницы: 134

BIZHUB PRO 1050P

Бренд: Konica Minolta Страницы: 588

WorkForce WF-3640

Бренд: Epson Страницы: 56

WorkForce WF-3520

Бренд: Epson Страницы: 2

WorkForce WF-3640

Бренд: Epson Страницы: 2

WorkForce WF-7525

Бренд: Epson Страницы: 156

WorkForce WF-3620

Бренд: Epson Страницы: 333

WorkForce WF-7010

Бренд: Epson Страницы: 157

WorkForce WF-7510

Бренд: Epson Страницы: 344

WorkForce WF-3520

Бренд: Epson Страницы: 325

WorkForce WF-7015

Бренд: Epson Страницы: 2

10600 - Stylus Pro Color Inkjet Printer

Бренд: Epson Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды