8VLQJ \RXU 6N\ GLJLER[
6.
Press the
button on your Sky remote control.
If your TV switches off, press select. The light on the Sky
remote control blinks twice.
If your TV does not switch off, press tv, then press the
button. Repeat this (press tv, then
) until your TV turns off,
then press select.
✎
If the light on your Sky remote control blinks three times, your
Sky digibox has checked all the possible settings for the code you
used. Check that you have the right 4 digit code and start again at
Step 1.
7.
Turn your TV back on again and press tv guide on your Sky
remote control. If you see the TV Guide screen, the remote
control setup process is complete.
If you do not see the TV Guide screen, you must now
complete the following steps:
8.
Press tv on your Sky remote control.
9.
Hold down select and the green button together for about two
seconds, until the red light on the Sky remote control blinks
twice.
10.
Key in the number of the channel on your TV that you use for
watching satellite TV.
11.
Press select on your Sky remote control. The red light blinks
twice. The remote control setup process is complete.
✎
If after trying this, you still have problems, call your broadcaster’s
helpdesk. For your broadcaster’s helpdesk number, select the
Telephone Numbers option from the Services screen.
Содержание DRX100 Sky digibox
Страница 1: ...Amstrad DRX100 Using your Sky digibox ...
Страница 51: ...8VLQJ RXU 6N GLJLER ...
Страница 54: ......