Amsco 3085 SP Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 53

Amsco 3085 SP Скачать руководство пользователя страница 2

i

Table of Contents

Operator Manual

150830-026

A WORD FROM STERIS CORPORATION

This manual contains important information on proper use and maintenance of
the Amsco

®

3085 SP™ Surgical Table.

All personnel involved in the use and

maintenance of this equipment must carefully review and comply with the
warnings, cautions, and instructions contained in this manual.

These

instructions are important to protect the health and safety of personnel
operating a 3085 SP table and should be retained in a conveniently accessible
area for quick reference.

Complete instructions for uncrating have been furnished. If missing, contact
STERIS for a replacement copy, giving the serial and model numbers of the
unit.

STERIS carries a complete line of accessories for use with this table. A STERIS
representative will gladly review these with you.

A listing of the

Safety Precautions

to be observed when operating and

servicing this equipment can be found in

S

ECTION

1

of this manual. Do not

operate or service the equipment until you have become familiar with this
information.

Any alteration of this equipment not authorized or performed by STERIS
Engineering Service will void the warranty, could violate federal, state, and
local regulations, and jeopardize your insurance coverage.

The Amsco 3085 SP Surgical Table is a mobile, electrohydraulically operated
general surgical table providing flexible articulation of the surgical patient.

A thorough preventive maintenance program is essential to safe and proper
unit operation. This manual contains maintenance schedules and procedures
which should be followed for satisfactory equipment performance.

Customers are encouraged to contact STERIS concerning our comprehensive
preventive maintenance agreement. Under the terms of this agreement,
preventive maintenance, adjustments, and replacement of worn parts are done
on a scheduled basis to help assure equipment performance at peak capability
and to help avoid untimely or costly interruptions. STERIS maintains a global
staff of well equipped, factory-trained technicians to provide this service, as
well as expert repair services. Please contact STERIS for details.

NOTE: A patient grounding post/potential equalization terminal (male connec-
tor, DIN 42801) is provided. The mating female connector is not furnished by
STERIS.

©2004

,

STERIS Corporation. All rights reserved. Printed in U.S.A.

Indications for Use

Advisory

Service Information

«
1
2
3
4
...
»

Содержание 3085 SP






















































Отзывы:

Нет отзывов