TDC-GPX2 Standard Board
ams Eval Kit Manual
Page 4
[v1-00] 2016-Oct-20
Document Feedback
2 Quick Start Guide
This section describes how to set up the GPX2-EVA-KIT, establish basic operation and make
measurements quickly.
2.1
Install the Software
It is crucial to install the software before connecting the evaluation kit to your computer. A default
driver loading of your OS may interfere with correct installation.
Download the latest software installation
package to the desired directory.
Unzip the package to the desired directory.
Open “setup.exe” from the unzipped directory.
Follow the instructions on the screen.
When connecting the PicoProg to the USB
port it will be listed first as “picoprog v2.0
unprogrammed” device.
This is true also for PicoProg V3.0.
Starting the software will download a special
firmware into the PICOPROG,
picoprog_gpx2_v005.hex or higher, and the
device will now be listed as “UNIPRO”:
Open the START Menu and open the software
from acam/GPX2/GPX2 Frontpanel
2.2
Install the Hardware:
Make sure software is installed correctly before proceeding with this step!
Connect your computer with the PicoProg V3.0 using USB cable.
Connect PicoProg V3.0 and the evaluation kit motherboard using the DB15 interfaces or
directly.
