Amron AMCON II 2825R Series, Руководство пользователя

Страница: 25 / 36

2825R-XX SERIES TWO DIVER RACK
MOUNT COMMUNICATOR USER MANUAL
282XR-UM REV 5.0
22
1. If operating as a standalone unit (not in a rack), select a proper location where the
communicator will be safe from hits or falls. The wires connection to it should be routed to
avoid possible tripping of personnel.
2. Clean the communicator after use or when needed. If the equipment is on an extended
work program, have the tender clean the equipment during slow work periods.
5.3 Recommended Maintenance Schedule
The following sections outline the recommended scheduled maintenance for the 2825R-XX.
5.3.1 Daily Maintenance
Wipe off any accumulated dirt and dust on the front panel or connectors using a
clean, damp cloth. Pay particular attention to where the various front panel
components attach to the panel.
5.3.2 Weekly Maintenance
Wipe off any accumulated dirt and dust on the front panel or connectors using a
clean, damp cloth. Pay particular attention to where the various front panel
components attach to the panel. Inspect the switches, binding posts and volume
controls for smooth operation.
5.3.3 6-Month Check
Wipe off any accumulated dirt and dust on the front panel or connectors using a
clean, damp cloth. Pay particular attention to where the various front panel
components attach to the panel.
1 Inspect the switches, binding posts and volume controls for smooth operation.
2 Connect to AC power to recharge the battery
3 Perform the 2-Wire and Full Duplex (4-Wire) system checks as described in
section 4.3.
5.3.4 Yearly Check
For maximum service life, it is recommended that the diver communicator be sent
back to Amron for a yearly check.
5.3.5 Long Term Storage
If the diver communicator is to be stored for a period greater than 30 days, it is
recommended that it be stored in a cool dry location. Make sure that the POWER
SWITCH is turned off during storage. The 2825R-XX communicator should be
stored connected to AC power. This ensures that the communicator will be fully
charged and ready to use when needed.