STEP 37
Always dry fit parts first.
Both wing to be assembled with the same jig. Do not discard jig
Align parts carefully. Maintain the assembly flat on table while proceeding to assembly.
1- Glue WJ1A and WJ1B as shown
2- Glue WJ2A and WJ2B as shown
3- Glue (4) WJ4 over WJ3 (3 assy with WJ4 on left and 1 on right shown at
***
)
4- Glue WJ1 and WJ2 on assy of WJ3 and WJ4. Glue (2) WJ4 in remaining slots
5- Glue (2) WJ5 at location shown
6- Fix jig on a flat building board with screws
WJ4 (4 places)
WJ1A
WJ2A
Left wing ribs numbers
WJ3 (4 places)
WJ2B
WJ1B
Right wing ribs numbers
***
WJ4
on right
WJ5
WJ5
WJ4
WJ4
