AMPTRON M810D Series, Руководство пользователя

Страница: 21 / 40

2: Mainboard Installation
17
Install Other Devices
Install and connect any other devices in the system following the
steps below.
Floppy Disk Drive
The mainboard ships with a floppy disk drive cable that can
support one or two drives. Drives can be 3.5” or 5.25” wide, with
capacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
Install your drives and connect power from the system power
supply. Use the cable provided to connect the drives to the floppy
disk drive connector
FDC .
IDE Devices
IDE devices include hard disk drives, high-density diskette drives,
and CD-ROM or DVD-ROM drives, among others. The mainboard
ships with an IDE cable supporting one or two IDE devices. If you
connect two devices to a single cable, you must configure one of
the drives as Master and one of the drives as Slave. The IDE
device’s documentation tells you how to configure a Master or a
Slave device. The Master device connects to the end of the cable.
Install the device(s) and connect power from the system power
supply. Use the cable provided to connect the device(s) to the
Primary IDE channel connector
IDE1 on the mainboard. If you
want to install more IDE devices, you can purchase a second IDE
cable and connect one or two devices to the Secondary IDE
channel connector
IDE2 on the mainboard. If you have two
devices on the cable, one must be Master and one must be Slave.
IDE1
1 1
IDE2
FDC
1