AMPTRON M810D Series, Руководство пользователя

Страница: 18 / 40

Mainboard User’s Manual
14
Connect the case switches and indicator LEDs to the SW1 header.
Here is the list of SW1 header’s pin assignments.
Pin Signal Pin Signal
1 HD_LED_P 2 FP PWR/SLP_P
3 HD_LED_N 4 FP PWR/SLP_N
5 RST_SW_N 6 POWER_SW_P
7 RST_SW_P 8 POWER_SW_N
9 RSVD_DNU 10 KEY
If there are a headphone jack or/and a microphone jack on the front
panel, connect the cables to the
AUDIO1 header on the mainboard.
Here is the list of AUDIO1 header’s pin assignments.
Pin Signal Pin Signal
1 AUD_MIC 2 AUD_GND
3 AUD_MIC_BIAS 4 AUD_VCC
5 AUD_FPOUT_R 6 AUD_RET_R
7 HP_ON 8 KEY
9 AUD_FPOUT_L 10 AUD_RET_L
Optional Extension Brackets
For this mainboard, you can also obtain a USB module extension
bracket for more USB ports. Install them by following the steps
below.
Note: All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.