Chapter 2
Installing CoreModule 410 Options
12
QuickStart Guide
CoreModule 410
Serial 1 Port (J3)
(COM 1)
Parallel Port (J4)
DiskOnChip Module
Bytewide
Socket (U18)
Pin 1
C
M
410_04a
Figure 2-1. Installing DiskOnChip
3. Remove the DiskOnChip from the anti-static package and check it for bent pins, before
attempting to insert it into the bytewide socket (U18).
4. Align pin one of the bytewide socket (U18) with pin 1 of the DiskOnChip. See Figure 2-1.
5. Gently insert the DiskOnChip into the bytewide socket (U18) as shown in Figure 2-1 and gently
rock it side to side until it is firmly into the bytewide socket (U18).
6. Set jumpers JP3, JP4 and JP5, to boot from the DiskOnChip before you restore power to the
CoreModule 410 assembly. See Tables 2-1 and 2-2.
Table 2-1. BIOS/DOC Select Jumper Matrix
Jumper JP4 & JP5
Non-DOC (DiskOnChip)
DOC (DiskOnChip)
Internal BIOS
Normal BIOS operation
(JP4 & JP5, Pins 1-3)
Boot from DiskOnChip in bytewide
socket (JP4 & JP5, Pins 1-3 & 2-4)
Default
setting
BIOS/DOC Select
Jumper Setting
(Shown in Default)
1
3
4
2
1
2
3
4
JP4 JP5
External BIOS
External BIOS – Used for
recovery (JP4 & JP5, Pins 1-2)
NA
Table 2-2. DiskOnChip Boot Address Setting
Jumper #
Installed
Removed
JP3 DiskOnChip
Address
Access from DC000h-DDFFFh
(Pins 1-2)
Default
setting
Access from CC000h-CDFFFh
(No jumper)
NOTE
Refer to Figure 1-2 for jumper locations and the CoreModule 410
Reference Manual for more information concerning other jumper settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
