CoreModule 410
QuickStart Guide
11
Chapter 2
Installing CoreModule 410 Options
The procedures in this chapter describe how to install or remove the supported options onto the
CoreModule 410 CPU Module. Some of the CoreModule 410 options not described in this chapter are
set in the BIOS Setup Utility.
NOTE
Refer to the CoreModule 410 Reference Manual for BIOS
options, including the Splash screen.
DiskOnChip (DOC) Installation
The CoreModule 410 CPU Module supports the DiskOnChip
by M-Systems in the bytewide socket
(U18).
Tools Required
Use a complete anti-static service kit (or the equivalent) to remove or install the DiskOnChip onto the
CoreModule 410 CPU Module. A complete anti-static service kit should include a static-dissipating
work surface, a chassis clip lead, and a wrist or ankle strap.
Installing the DiskOnChip (DOC)
CAUTION
To prevent damage to the CoreModule 410 and the DiskOnChip, ensure the power
supply to the CoreModule 410 is turned off and the power cord has been removed
from the power source. Most AT power supplies will continue to provide standby
current to the CoreModule 410 until the power cord is disconnected.
1. If the CoreModule 410 is already powered up, power down the system and remove the power
cord from the power supply.
CAUTION
To prevent damage to the static sensitive components on the CoreModule 410,
ensure you follow good Electrostatic Discharge principles. Components on the
CoreModule 410 and DiskOnChip are sensitive to static electricity and can be
easily damaged by improper handling. Do the following when handling the
CoreModule 410 and its related DiskOnChip:
Always use an anti-static wrist/ankle strap and a grounding mat.
Before you handle the CoreModule 410 or remove the DiskOnChip from the anti-
static bag, touch a grounded, unpainted metal surface to discharge any static
electricity.
2. Verify the bytewide socket (U18) pins are clear of any material or obstructions that would
prevent installation or bend the DiskOnChip pins.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com