3
sw915 digital audio travel partner
*
USB In: Computer can connect here to allow audio files on computer to be played.
**
Mini Jack Inputs: To connect devices as MP3 players, portable tape and CD players or any other audio device that has a 1/8-in. output.
***
XLR/Combo Jacks: To connect balanced or unbalanced microphones that have either XLR or phone plug connectors.
****
AC Power Jack: Either 110 or 220 volts can be used WITHOUT needing to move a switch; as the power supply does this action.
*****
Battery Status Light: Red = No battery power, Yellow = 1 hour left of battery power. For best results – charge battery overnight.
#
Overload light: Lights up when volume is turned up too far and could cause audible distortion.
##
¼-in. Phone Jacks: Can be used for outboard processors, musical instruments and recorders.
control panel
L
POWER
BATT STAT
OVERLOAD
R
A
U
X
USB
IN
POWER
CH. 1
CH. 2
CH. 3
LINE
IN
ADJUST
SAVE
DN
UP
SELECT
OUT
CHARGE/AC ON
25 AMP
CIRCUIT BREAKER
110/220 VAC
AUTO SWITCHING
PARTNER
QUICK SET UP GUIDE
1. Power unit on with rocker switch. The display will light with MASTER VOLUME indicated.
Display will go black after one minute’s inactivity to preserve battery power. Display will
illuminate with a press of any button.
2. Use the remote or the UP and DN buttons on the control panel, to select a function.
3. To change the level of a selected function, press the ADJUST button. ADJ will appear on the
display. Press UP or DN button to obtain desired level, then press SAVE.
4. Use UP and DN buttons to cycle through BASS, TREBLE, DUCKING, REVERB, VOICE, and all
VOLUME controls; then ADJUST and press SAVE.
5. UHF Wireless MIC - To turn receiver on - Press and hold the SET button for about two seconds.
The current channel will flash three times quickly; then the system will begin to scan for the
next open channel. When it finds an open channel, it will flash the open channel three times
and then set the channel.
To turn transmitter on - Before turning on the transmitter, use the provided screwdriver to set
the transmitter channel selector switches to the same number that is displayed on the
receiver. Select channels 1-8.
6. BATT STAT indicator - Red = no battery power, Yellow = 1 hour left. Charge battery overnight
for best results.
Please refer to the owners manual for complete instructions.
Instructions are also available on www.ampli.com. If you need further
assistance please call 1-800-267-5486, 8am-6pm M-F CST. WWW.AMPLI.COM
MADE IN THE USA
inForMation displaY
Turns off after 1 minute of inactivity to
save battery. Comes on with touching
any of the 4 buttons below display (DN,
UP, SAVE, ADJUST)
Cd plaYer / reCorder
wireless MiCropHone reCeiver
3 addtitonal slots For
optional eQuipMent:
Cassette reCorder/plaYer,
digital reCorder/plaYer or
wireless MiCropHone reCeiver
rCa auXiliarY
inputs
* usB input
*** Xlr/CoMBo JaCKs
** Mini JaCK inputs
Cassette pitCH
Control (optional
eQuipMent)
audio Control Buttons - used
to set all audio FunCtions
line in / line out ##
pHone JaCKs (1/4")
indiCator ligHts:
power
***** BatterY status
# overload
indiCator ligHt For
aC or power
*** Xlr/CoMBo JaCKs
aC power JaCK witH
Built-in line Fuse
Holder
power switCH
BatterY panel
user aCCessiBle
Quick set up
instructions are on page 2
NEEd hELp?
CALL 800-267-5486
Or 847-498-9000
EmAiL:
CuSTOmErSErviCE@
AmpLi.COm