7
Then press OK to view, select AGC (as Figure17), press OK to view AGC alarm (as Figure18).
Figure 17
Figure 18
Select DL OUTPUT (as Figure 19), press OK button to view DL OUTPUT alarm (as Figure 20).
Figure 19
Figure 20
To remove alarm, if it is in smart mode, the device will make adjustment automatically after
re-powering; if it is in manual mode, you should adjust the outdoor antenna and the gain manually,
until the alarm is eliminated. If all is in OK status, that means it works normally. Press the RETURN
button back to home page after adjustment.
h. Restore Factory Default
Move the cursor to the forth line “STATUS”with UP or DOWN button (as Figure 21), then press
OK button to enter, then navigate the cursor to“DEFAULTS” (as Figure 22), press OK button to
confirm restoring factory default; factory default is under Smart Mode.
Figure 21
Figure 22
