Ampler Curt 2021, Руководство пользователя

Страница: 25 / 60

Ampler – Stout, Stellar, Curt 23 Assembly
Handlebar alignment
ATTENTION
Bolts can be damaged by over-tightening!
Overtightening the bolts can overload them, damage the thread, leading to loss of locking force and breakage of the bolts.

Do not exceed the tightening torque of the bolts.

If necessary, use a suitable torque wrench.
1. Slightly loosen both side stem clamping bolts with the
4 mm hex key.
To straighten the handlebars, it is best to stand upright over
the top tube, facing the handlebars.
2. Straightening the handlebars.
y
Do not tighten the stem clamping bolts yet.
3. Place your fingers on the cap between the frame and
the fork stem.
4. Move the wheel back and forth with the front brake
applied.
y
If there is noticeable movement of the cap at the
transition between the frame and the headset,
proceed as follows.